The Kodak Cherish C225 Baby Monitor helps you stay connected to your little ones at home or on the road.
With rechargeable batteries and WiFi connectivity, the Kodak C225 camera provides tilt, pan and zoom options so you can capture even more of the quiet moments.
With a Kodak baby camera and the Kodak Smart Home App, you can cherish all the beautiful moments of your baby's development without disturbing their sleep.
Stay Connected from Wherever You Are
Extended range and WiFi connectivity
The WiFi connected video baby monitor delivers crystal clear HD video and audio direct to your device, helping you keep an eye on your little one, whether you’re travelling or in the next room.
Stay close wherever you are
The Kodak Cherish C225 is designed to work best in a home up to 370 square metres. The WiFi function delivers a clean video feed from the baby video camera to your smartphone or tablet.
Take it on the road
Built-in rechargeable batteries in both the baby monitor and camera means you can bring your Kodak Cherish C225 on the road. Easily install the monitor in any room and stay connected via WiFi wherever you are.
Perfect Clarity for Those Special Moments
Crystal clear HD image
With a 2.8-inch wide screen display, the Kodak Cherish C225 delivers an uncompromised image that lets you keep a close eye on your little one with the HD stream to your smartphone or tablet.
You’ll always know how your little one is sleeping with smart motion and sound notifications instantly delivered to the Kodak Smart Home App.
Cloud & SD-Card recording
Revisit special moments for years to come and share them with family using the Kodak Smart Home App and SD-Card Recording functions via your smartphone or tablet.
Sleep Easy with Smart Design
2 way Talk
The Kodak Cherish C225 delivers crystal clear audio in both directions, so you can use your voice to soothe your little one.
Keep your baby’s room at the perfect temperature with smart temperature notifications delivered to your device.
Install your Kodak Cherish C225 with ease on any wall and create the perfect view for your sleeping baby.
Tilt, pan & zoom
Experience increased focal range using your smartphone or tablet to control the viewfinder on your Kodak Cherish C225 .
Quietly Monitor Your Little One
Experience a clear HD Video even when the lights are off with night vision.
One touch on/off screen
View movement or sounds with the touch of a button without an intrusive glowing screen.
The softly glowing keypad on your monitor allows for subtle operation after dark.
Soothing lullabies and white noise
Quiet lullabies and white noise helps soothe your little ones as they fall asleep.
Power Indicator on the Parent Unit does not come on
Check whether the Parent Unit is powered on.
Check whether the battery is charged.
Recharge the Parent Unit by connecting it to the power supply.
The Parent Unit beeps repeatedly
The Parent Unit and the Baby Unit may be out of range with each other.
Reduce the distance between the units, but not closer than 3 feet/0.9 meters.
The Baby Unit may be switched off. Slide the ON/ OFF switch to the ON position to switch on the Baby Unit.
The battery in the Parent Unit is running low. Connect the Parent Unit to an electrical outlet with the supplied power adapter to recharge the battery.
The Battery icon on the Parent Unit flashes
The Parent Unit maybe running low on battery. Connect the Parent Unit to an electrical outlet with the supplied power adapter to recharge the battery.
Unable to hear sound or baby crying from the Parent Unit
The volume level in the Parent Unit may be set too low. Refer to section 4.10 for volume level settings.
The Parent Unit and the monitoring Baby Unit may be out of range with each other. Reduce the distance between the units, but not closer than 3 feet/0.9 meters.
The baby monitor system produces a high-pitched noise
The Parent Unit and the Baby Unit are too close to each other. Make sure the Parent Unit and Baby Unit are at least 3 feet/0.9 meters away from each other.
The speaker volume of the Parent Unit may be set too high. Decrease the volume of the Parent Unit.
Battery life in the Parent Unit runs low quickly
The LCD brightness may be set too high. Try to decrease the brightness level. Refer to section 4.5 for details.
The volume level of the Parent Unit may be set too high, which consumes power. Decrease the volume level of the Parent Unit. Refer to section 4.10 for volume level settings.
Parent Unit image is not in color
If the Baby Unit is placed in a dark room, it will turn ON infra-red illumination and the picture image changes from ‘color’ to ‘black and white’. When the room becomes brighter, the picture will resume back to ‘color’.
There is no transmission from the Baby Unit to the Parent Unit
Switch on both the Baby and Parent Units. • Pair the Baby Unit again as described in see “4.2.1 Add (Pair) a Camera”.
If there is no free camera location, delete a location first, as described in see “4.2.2 Delete a Camera”.
The Parent Unit is in standby
To turn on the Parent Unit screen, slide the ON/ OFF switch to the ON position.
Temperature and humidity reading on the Parent Unit display does not reflect a correct reading.
Upon power on, the temperature and humidity reading on the parent unit will indicate an accurate reading up to 15 minutes, as the Baby unit requires to adjust to surrounding ambiance temperature and humidity.